Weltool W3Pro TAC LEP tactical flashlight

Weltool W3Pro TAC is the version of W3Pro, with 930 lumens, 547,500 candela, and a throwing distance of 1479 meters (1617yd)! Use 1 pcs 21700 rechargeable lithium-ion battery, with overheat protection to ensure the flashlight will not overheat. W3Pro TAC's LEP light source has high energy density, and after being reflected by the optical lens, it forms a dazzling beam of light! The default is high mode when the light is turned on, and the strobe and low are hidden; when the power is off, half-press the switch to instantly become high, or you can quickly and continuously half-press the switch 4 times to turn on the strobe. The beam of W3Pro TAC has a spill at close range, and at the same time has a super long-range throwing ability. It is especially suitable for field rescue, indication on the sea, maintenance of high-voltage line towers, etc., and is specially designed for special lighting.

Features:  

Aluminum alloy, black hard anodized surface

Acrylic lens

Special LEP module,5700-6700K, lifespan about 10,000 hours

Output：

(Tested with Weltool UB21-50 5000mAh 21700 rechargeable lithium-ion battery, outdoor, constant on, below 25 degrees Celsius)

This LEP light source complies with IEC 60825 Class 1 and IEC 62471 Exempt

Use one 21700 li-ion rechargeable battery

Tail Forward switch, 50,000 press life

High efficiency drive circuit, no noise and no PWM

when the flashlight temperature is too high, the flashlight will automatically reduce the brightness to prevent overheating

With reverse polarity protection

With low voltage prompt function,With battery over discharge protection

Coated tempered glass lens 

Passed 1 meter drop test

IP67，can be used in heavy rain

Each flashlight has a unique serial number

Size (±0.5mm): (head diameter) 33mm, (body diameter) 26.5mm, (length) 162mm

Weight: 168±0.5g (without battery)

Included: UB21-50 li-ion battery, Type-C charging data cable, waterproof ring, stainless steel pocket clip

Instructions:

• First install the battery correctly

• Half-press the tail switch button once to turn on the high mode, release it to turn off, even if this operation is frequent, it will be high. At this time, press the switch hard to make a "click" sound to keep working continuously, and press the "click" again to turn off the flashlight.

• The hidden mode can be activated by half-pressing more than 4 consecutive times in the off state. When the hidden mode is turned on, the strobe is first. At this time, release the switch and then half-press it to switch to low immediately. Low and strobe can be switched in a cycle. Press the switch firmly to lock the strobe or low continuous operation; in the hidden mode, it will automatically exit the hidden mode and return to the high mode after shutting down for more than 1.5 seconds.

• When the battery power is low, the main light of the flashlight will flash to remind you, please charge the battery in time.

• When the battery power is exhausted, the flashlight will automatically stop working.